Framery 2Q - Page 176

Framery 2Q Huddle
4. Install the roof body covers (2 pcs) to the left-hand front and right-hand back corners of
the roof.
Installation requires two people: One guides the cover from the ladder, one from the
floor.
Guide the cover first to the center of the roof and guide the edges of the covers against
the flanges in the middle cover. Then pull down and guide the lower edge into the
groove on the wall.
Note: Do not lift the cover from the opening. The narrow metal strip bends.
176
Installation instructions
info@frameryacoustics.com