Framery 2Q - Page 186

To Previous Page

Framery 2Q Huddle

Installation instructions

Patamäenkatu 7

33900 Tampere

FINLAND

VAT: FI 23527139

Main Page

Table of Contents3
Warranty Checklist7
Important Safety and Product Instructions8
Preface8
Product Information8
Copyright8
Manual Contents8
Intended Use8
Non-Conventional Use8
Ambient Conditions for Use9
Warning, Information, and Safety Symbols in this Manual9
Main Safety Risks Related to the Installation, Maintenance, Disassembly, and Use of the Product9
Installation, Maintenance, and Disassembly10
Electrical Safety10
Fire Safety11
Use12
Installation Requirements14
Tools and Accessories14
Main Dimensions15
Installation Space16
Operating Space16
Prepare the Carpet for Installation17
Install the Back Half of the Pod18
Install the Back Half of the Floor18
Install the Back Half of the Roof22
Prepare the Roof Modules (Back)22
Attach the Roof Modules Together (Back)24
Install the Upper Frame (Back)26
Install the Wall Modules and the Roof of the Back Half of the Pod27
Install the Support Beam to the Wall Modules (Back)27
Assemble the Roof Support Beams (Back)28
Install the Back Half of the Roof to the Wall Modules29
Install the Combined Roof and Walls to the Floor (Back)32
Install the Front Half of the Pod34
Install the Front Half of the Floor34
Install the Front Half of the Roof36
Prepare the Roof Modules (Front)36
Attach the Roof Modules Together (Front)38
Install the Wall Modules and the Roof of the Front Half of the Pod41
Install the Support Beam to the Wall Modules (Front)41
Install the Front Half of the Roof to the Wall Modules42
Install the Combined Roof and Walls to the Floor (Front)45
Connect the Back and Front Halves of the Pod47
Check the Straightness of the Pod Halves after Connecting50
Install the Back Frames and Glasses56
Install the Left-Hand Frames56
Install the First Side Glass and the Center Glass59
Install the Right-Hand Frames and the Other Side Glass60
Finalize the Installation of the Back Frames and Glasses63
Install the Carpet65
Install the Front Frames and Glasses66
Install the Corner and Side Frames66
Install the Control Panel68
Install the Booking System Bracket (Optional)72
Install the USB Cord into the Strike Plate-Side Glass Frame (Optional)73
Install the Booking System Bracket (Optional)74
Install the 5V Unit (Optional)80
Install the Side Glasses84
Install the Front Center Frame88
Finalize the Installation of the Front Frames and Glasses89
Install the Control Unit90
Install the Control Panel Cord and the Ceiling Threshold93
Install the Door99
Install the Floor Threshold99
Install the Door100
Adjust the Closing Speed of the Door103
Install the Lock Case109
Install the Door Handle110
Install the Smart Lock Handle (Optional)113
Adjust the Strike Plate120
Check the Lock Function121
Adjust the Door Height124
Adjust the Automatic Door Seal127
Install the Interior and Electrics129
Install the Metal Box to the Table Top129
Install the Power Outlet to the Table Top134
Install the Wall Bracket and Table Legs136
Install the Power Outlet on the Table138
Install the Power Cord from the Roof141
Install the Seals141
Install the Display Bracket and Display (Optional)147
Install the Metal Trims and Cord Duct150
Install Electrical Connections to the Control Unit154
Install the Motion Detector158
Install the Lights159
Finalize the Installation of the Table and Electrics161
Install the Cover Panels and the Body Covers166
Install the Roof Cover Panels166
Install the Roof Cover Plates167
Install the Wall Cover Panels168
Install the Bottom Body Covers170
Install the Wall Body Covers171
Install the Roof Body Covers174
Finalize the Installation of the Body Covers177
Install the Whiteboard178
Finalize the Installation182

Framery 2Q - Page 186

Table of Contents

Related product manuals