FRC Turbofoam TFC100 - Operation and Programming; Setting System Time

TFC100 Rev180215
15
FIRE RESEARCH CORPORATION
www.reresearch.com
26 Southern Blvd., Nesconset, NY 11767
TEL 631.724.8888 FAX 631.360.9727 TOLL FREE 1.800.645.0074
DIRECT INJECTION
FOAM PROPORTIONING SYSTEM
WITH ELECTRIC FOAM CONCENTRATE PUMP
MODELS: TFC100, TFC200, TFC300, TFC400
OPERATION AND
PROGRAMMING
Set Time (Code P109)
Enter password code 1221. (Refer to Enter Password for Program Access.)
1. Press the + and – buttons and scroll to code P109.
2. Press the PRESET button.
Result: The message display shows the time with the hours ashing.
3. Press the + and – buttons to change hours.
4. Press the PRESET button.
Result: The message display shows time with the minutes ashing.
5. Press the + and – buttons to change the minutes.
6. Press the PRESET button.
Result: The message display shows time with the AM/PM ashing.
7. Press the + and – buttons to change the AM/PM.
8. Press and hold the MENU button for ve (5) seconds to save.
OPERATION AND PROGRAMMING