FRC Turbofoam TFC100 - Calibration, Maintenance, and Troubleshooting; Troubleshooting Flow Chart

TFC100 Rev180215
29
FIRE RESEARCH CORPORATION
www.reresearch.com
26 Southern Blvd., Nesconset, NY 11767
TEL 631.724.8888 FAX 631.360.9727 TOLL FREE 1.800.645.0074
DIRECT INJECTION
FOAM PROPORTIONING SYSTEM
WITH ELECTRIC FOAM CONCENTRATE PUMP
MODELS: TFC100, TFC200, TFC300, TFC400
CALIBRATION, MAINTENANCE,
AND TROUBLESHOOTING
Refer to the Error Codes
and Fault Warnings
Troubleshooting Table.
Check +dc voltage to the control
module 12-pin connector pins 1 and 2.
Remove and replace
the control module.
Does the control module
enter the manual mode?
Is an error code or fault
warning shown in the display?
Supply system with
power. Does OFF show
in the FLOW display?
Does the system pass
the Operational Test?
NO
NO
NO
YES
YES
YES
YES
NO
CALIBRATION, MAINTENANCE, AND TROUBLESHOOTING