EasyManua.ls Logo

FRC Turbofoam TFC100 - Electric ABF Selector Wiring

FRC Turbofoam TFC100
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TFC100 Rev180215
64
Figure W6. Electric ABF Selector Wiring
12-Pin ABF Connector/Cable
Pin/Wire Description
1/Red Supply Power
2/Black Ground
3/Black FRC Datalink (–)
4/Red FRC Datalink (+)
5 FRC Datalink (–)
6 FRC Datalink (+)
7 Spare
8 Spare
9 Spare
10 Spare
11 Ground
12 Supply Power
6-Pin Valve Connector/Cable
PinWire Description
1/Red Close Valve (+)
2/Black Ground
3/Yellow Close Limit Switch
4/Blue Open Limit Switch
5/Brown Limit Switch Return
6/Green Open Valve (+)
Water Flush
Valve
There is a position indicator
and manual adjustor located
on the side of each valve
A Tank
Valve
B Tank
Valve
Status LEDs
Note: The assembly must be mounted
so the manifold discharge is not
above the foam input connections.
Pin 1 A Tank
Pin 1 Water Flush
Pin 1
Pin 1 B Tank
Electric ABF Selector TFC400 Only
TFC400 system requires that the electric ABF selector valve is installed. The TFC400 has a water ush
valve and two foam tank valves that are controlled from the control module pushbuttons.
A B
A - Not active;
B - Blinks one time when a
limit switch changes status.

Table of Contents

Related product manuals