FRC Turbofoam TFC100 - Single Tank System Cable Part Numbers

TFC100 Rev180215
72
INDEX PART NUMBER DESCRIPTION QTY
1
XE-TF2SENS-C15A
XE-TF2SENS-C20A
XE-TF2SENS-C30A
CABLE TURBOFOAM PWR SENSOR DATA 15-FT
CABLE TURBOFOAM PWR SENSOR DATA 20-FT
CABLE TURBOFOAM PWR SENSOR DATA 30-FT
12-Pin Deutsch Plug - 3-Pin Flow Sensor Plug - 4-Pin Deutsch Plug - 2-Wires wButt Crimps
1
2* XE-XXDLY4-C1A CABLE DATALINK WYE 4P CONN
4-Pin Deutsch Receptacle - 4-Pin Deutsch Plug - 4-Pin Deutsch Plug
-
3* XE-XXDLWLEXT-C10A CABLE DLINK TankVision Pro 4PDR BLK-PIN 10FT
4-Pin Deutsch Receptacle - 2 Socket Pins, Deutsh, for 12-Pin TankVision Pro Connector
-
4* XE-TF10EEXT-C15A CABLE TFC PUMP PWR DATA 15-FT
12-Pin Deutsch Plug - 4-Pin Deutsch Receptacle - 2-Pin Deutsch Receptacle - 1 Wire wButt Crimp
1
5* XE-TF10EEXTF-C30A CABLE TFC PUMP PWR DATA FLSH 30-FT
12-Pin Deutsch Plug - 4-Pin Deutsch Receptacle - 2-Pin Deutsch Receptacle - 6-Pin Deutsch
Receptacle w/10-ft cable - 1 Wire wButt Crimp
1
6*
6A*
XE-XX6PDP-A0A
XE-TF2TNKEXT-C0A
ACCY 6-PIN DEUTSCH SEALING PLUG
CABLE TURBOFOAM TANK-EMP SENS 8-IN
6-Pin Deutsch Plug - 3-Wires wButt Crimps
1
TurboFoam Single Tank System Cables
* Notes:
Cables 2 and 3 are only required with a TankVision Pro installed.
Wire with cables 4 and 5 from pin 10 provides a +DC voltage (3 amps) when foam tank is empty and pump stops.
Item 6 is a protective plug for the control module 6-Pin connector.
Cable 6A is required if tank oat switches are installed. The tank oat switches are wired to the control module connector tank
empty inputs and the FRC datalink y-cables for the TankVision Pro are not needed.
Cables required can vary with options included with the system.