172
Logging on - un-
locking function,
forgotten pass-
word
There are two auxiliary functions when logging on to SmartManager:
- Start unlocking function?
- Forgotten password?
Start unlocking function?
An unintentionally locked power source can be unlocked with this function and all its func-
tions made available.
Click "Start unlocking function"?
Create verification file:
click on "Save"
A TXT file with the following name will be saved to the computer's "Downloads" folder:
unlock_SN[serial number]_YYYY_MM_DD_hhmmss.txt
Send this verification file to Fronius Technical Support by e-mail:
welding.techsupport@fronius.com
Fronius will respond to each e-mail with a one-time unlocking file named as follows:
response_SN[serial number]_YYYY_MM_DD_hhmmss.txt
Save the unlocking file to your computer
Click on "Search unlocking file"
Apply unlocking file
Click on "Install unlocking file"
This will work just once to unlock the power source.
Forgotten password?
After clicking "Forgotten password?" a notice will be displayed explaining that the pass-
word can be reset on the power source (see "Resetting the website password", page 141).
Changing pass-
word / logging off
Changing the password for the SmartManager:
Enter the old password
Enter the new password
Repeat the new password
Click on "Save"
1
2
3
4
5
6
7
By clicking this symbol
- the user password can be changed
- you can log out of SmartManager
NOTE!
User name = admin (predefined, cannot be edited!)
The password can only be reset on the power source.
1
2
3
4
To Next Page
Loading...
