87
EN
Select "Correction limits"
A list of the job correction limits for the last job opened is displayed.
Turn the adjusting dial and select either the job or the job limits to be modified
The choice between the job and the job limits can also be made by touching the "Job
number / Job parameter" button.
Select job:
- Press the adjusting dial
The job number is highlighted in blue and can now be changed.
- Turn the adjusting dial to select the job to be altered
- Press the adjusting dial to change the job
Select job limits:
- Turn the adjusting dial and select the desired limit group
- Press the adjusting dial
The selected limit group opens.
- Turn the adjusting dial and select the top or bottom limit
- Press the adjusting dial
The value of the limit parameter is highlighted in blue and can now be changed.
- Turn the adjusting dial; the amended value is applied immediately
- Press the adjusting dial to select other limit parameters
Select "Finish"
3
3
4
5
To Next Page
Loading...
