60
Connecting the
gas cylinder
1 2
Connecting the
polarity reverser
and establishing
a grounding
(earthing) con-
nection
1
1
1
1
Standard values Smooth feed roll-
ers
Steel 3 - 4
CrNi 3 - 4
Standard values "Intermeshed"
feed rollers
Tubular cored elec-
trodes
3
Aluminium 1 - 3
WARNING! There is a high risk of very serious injury and damage if a gas cylin-
der falls over. When using gas cylinders:
- Place them on a solid, level surface in such a way that they remain stable
- Secure the gas cylinders to prevent them from falling over
Observe the safety rules of the gas cylinder manufacturer.
1
2
1
NOTE! Connect the polarity re-
verser according to the wire elec-
trode used.
NOTE! Check the wire electrode
packaging to determine whether
the wire electrode is for (+) or (-)
welding.
To Next Page
Loading...
