Fronius TransSteel 2200c - Saving and Retrieving Easyjobs; General; Saving an Easyjob; Retrieving an Easyjob

85
EN
Saving and retrieving EasyJobs
General The "Save" buttons allow two EasyJobs to be saved. The adjustable parameters on the
control panel are saved as EasyJobs.
Saving an Easy-
Job
Press and hold one of the "Save" buttons to save the current settings on the control
panel, e.g.:
- The left indicator displays "Pro"
- After a short time, the left indicator switches to the original value
Release the "Save" button
Retrieving an
EasyJob
To retrieve saved settings, press the corresponding "Save" button briefly, e.g.:
- The control panel will show the saved settings
Deleting an Easy-
Job
Press and hold the relevant "Save" button to delete the memory content of that "Save"
button, e.g.:
- The left indicator displays "Pro".
- After a short time, the left indicator switches to the original value
Keep the "Save" button held down
- The left display shows "CLr".
- After a while, both displays show "---"
Release the "Save" button
NOTE! Setup parameters are not saved as EasyJobs.
1
2
1
1
2
3