139
EN
Job
General
Opening the Job
set-up menu
Save / retrieve The 'Save' and 'Retrieve' commands on the Job menu are described in the "Welding" chap-
ter.
Overview The Job set-up menu comprises the following sections:
- Optimise job
- Delete a job
The following actions can be performed in the Job set-up menu:
Save: Save settings as a job
Retrieve: Retrieve jobs for the welding job
Retrieve: Adjust and modify stored jobs
Delete: Delete stored jobs
Press Menu key
The main menu appears, e.g.:
Use the adjusting dial to select "job" (turn the adjusting dial)
Press the adjusting dial
The menu items for the job appear:
The power source is now in the Job set-up menu.
1
2
3
To Next Page
Loading...
Need help?
General
