82
Saving settings as a job
General In the individual welding processes, settings and welding parameters can be stored in 100
jobs (job numbers 0 to 99).
Preparation
Select the mode to be saved using the Mode button:
TIG 2-step mode
TIG 4-step mode
Manual metal arc welding mode
The relevant image for the welding parameters is displayed, e.g.:
TIG welding parameters for 2-step mode (main
current welding parameter selected)
Only for MagicWave: press the Process button to select the required welding
process
TIG AC welding process / manual metal arc AC welding
TIG AC welding process with automatic cap-shaping function / man-
ual metal arc DC welding
TIG DC welding process / manual metal arc DC+ welding
Use the right arrow key to select the individual welding parameters
Change the welding parameter value by turning the adjusting dial
Press the Menu key in order to set other welding parameters in the set-up
menu
The relevant menu is displayed, e.g.:
Use the adjusting dial to select the desired set-up menu
Open the selected set-up menu by pressing the adjusting dial
Use the adjusting dial to select a welding parameter
To change a welding parameter press the adjusting dial
1
2
3
4
5
6
7
8
9
To Next Page
Loading...
