166
Factory - for resetting the welding machine
General The welding machine can be reset in the menu when TIG 2-step mode, TIG 4-step mode
or rod electrode welding mode is selected.
Factory - for re-
setting the weld-
ing machine
NOTE! When the welding machine is reset, all the personal settings in the set-up
menu are lost. Jobs are not deleted when the welding machine is reset - these are
preserved. The parameter settings in the second level of the set-up menu are not
deleted either.
Opening the basic settings
Select 'Factory' by turning the adjustment dial:
Press the adjusting dial to display the factory screen
Press the left button to cancel
Press the right button to reset the welding machine
The welding machine is reset and a confirmation screen appears:
If you press the button on the right the basic settings will appear:
1
2
3
4
To Next Page
Loading...
Need help?
General
