Fronius TransTig 2200 Comfort - Welding Parameters for Rod Electrodes

75
EN
Welding parame-
ters for rod elec-
trodes
If cold wire-feed unit option is available
Unit m/min ipm
Setting range OFF / 0.1 - max. OFF / 3.9 - max.
Factory setting OFF
Unit mm in.
Setting range OFF - max. OFF - max.
Factory setting 2,4 0.1
Starting current: starting current < main current
("SoftStart")
Starting current: starting current = main current
Starting current: starting current > main current ("Hot-
Start")
Unit % (of main current)
Setting range 0 - 200
Factory setting 150