91
EN
The Setup menu
General The set-up menu provides easy access to the knowledge base in the power source and to
additional functions. The set-up menu can be used to make simple adjustments of the
welding parameters to suit the various job settings.
- The set-up menu contains all the set-up parameters that have an immediate effect on
the welding process.
- The 2nd level of the set-up menu contains all the set-up parameters needed for mak-
ing the preliminary settings on the welding device.
The welding parameters are arranged in logical groups.
Overview "The set-up menu" is composed of the following sections:
- TIG setup
- TIG setup 2nd
- AC setup
- AC setup 2nd
- Gas setup
- Cold wire setup
- Calibrating the push-pull unit
- Rod elec. setup (rod electrode setup)
- Rod elec. setup 2nd (rod electrode setup 2nd)
- AC setup (for rod electrodes)
- Job
- Basic setting
- Info
- Lock keys
- Factory - for resetting the welding machine
- L/R alignment
To Next Page
Loading...
