Fronius TransTig 800 Job - Transtig800; 2200 Job

137
EN
TransTig
800 / 2200 Job
Welding current at
10 min/40 °C (104 °F) 40% d.c.
2)
- 500 A
10 min/40 °C (104 °F) 45% d.c.
2)
400 A -
10 min/40 °C (104 °F) 60% d.c.
2)
360 A 440 A
10 min/40 °C (104 °F) 100% d.c.
2)
300 A 350 A
Open circuit voltage 90 V 90 V
Working voltage
TIG 10.1 - 26.0 V 10.1 - 30.0 V
Electrode 20.4 - 36.0 V 20.4 - 37.6 V
Striking voltage (U
p
) 9.5 kV 9.5 kV
The arc striking voltage is suitable for manual operation.
Degree of protection IP 23 IP 23
Type of cooling AF AF
Insulation class F F
EMC emission class
(in accordance with EN/IEC 60974-10)
A A
Dimensions L x W x H (with handle) 625 / 290 / 705 mm
24.6 / 11.4 / 27.8 in.
625 / 290 / 705 mm
24.6 / 11.4 / 27.8 in.
Weight 60 kg
132.30 lb.
60 kg
132.30 lb.
Mark of conformity S, CE, CSA S, CE, CSA
MW 4000 Job MV MW 5000 Job MV
TT 800 Job TT 2200 Job
Mains voltage 230 V 230 V
Mains voltage tolerance -20 % / +15 % -20 % / +15 %
Mains frequency 50/60 Hz 50/60 Hz
Mains fuse protection (slow-blow) 16 A 16 A
Mains connection
1)
Restrictions possible No restrictions
Primary continuous power (100% d.c.
2)
) 2.1 kVA 3.0 kVA
Cos phi 0,99 0,99
Welding current range
TIG 0.5 - 80 A 3 - 220 A
Electrode 10 - 80 A 10 - 180 A
Welding current at
10 min/25 °C (77 °F) 50% d.c.
2)
- 220 A
10 min/25 °C (77 °F) 60% d.c.
2)
- 200 A
10 min/25 °C (77 °F) 100% d.c.
2)
80 A 170 A
10 min/40 °C (104 °F) 40% d.c.
2)
- 220 A
10 min/40 °C (104 °F) 60% d.c.
2)
80 A 180 A
10 min/40 °C (104 °F) 100% d.c.
2)
70 A 150 A
Open circuit voltage 85 V 84 V
Working voltage
TIG 10.0 - 13.2 V 10.1 - 18.8 V
Electrode 10.4 - 23.2 V 20.4 - 27.2 V