27
EN
Description of the control panels
General The key feature of the control panel is the logical way in which the control elements are
arranged. All the main welding parameters needed for day-to-day working can easily be:
- selected using the buttons
- altered with the adjusting dial
- shown during welding on the digital display.
NOTE!
Due to software updates, you may find that your device has certain functions that
are not described in these operating instructions or vice versa.
Individual illustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.
Safety
WARNING!
Danger from incorrect operation.
Possible serious injury and damage to property.
► Do not use the functions described here until you have read and completely under-
stood these Operating Instructions.
► Do not use the functions described here until you have fully read and understood all of
the Operating Instructions for the system components, in particular the safety rules!
To Next Page
Loading...
