95
EN
The Setup menu
General The set-up menu provides easy access to the knowledge base in the power source and to
additional functions. The set-up menu can be used to make simple adjustments of the
welding parameters to suit the various job settings.
- The Set-up menu contains all the set-up parameters that have an immediate effect on
the welding process.
- Set-up menu - level 2 contains all the set-up parameters needed for making the pre-
liminary settings on the welding machine.
The welding parameters are arranged in logical groups. Each of these groups is called up
by pressing a different combination of buttons.
Overview "The Set-up menu" is composed of the following sections:
- Protective gas shield set-up menu
- TIG set-up menu
- TIG set-up menu: level 2
- AC/polarity reversal set-up menu
- AC/polarity reversal set-up menu - level 2
- Rod electrode set-up menu
- Rod electrode set-up menu level 2
- Displaying welding circuit resistance r
- Displaying welding circuit inductivity L
To Next Page
Loading...
