Printer Connection and Software Installation 87
• When Using IP Printing
1 Turn on the printer.
2 Make sure that your computer is connected to the network.
If you use wired connection, make sure that the Ethernet cable is connected between the printer and the
network.
If you use wireless connection, make sure that wireless connection is configured properly on your computer
and printer.
3 Display System Preferences, and then click Print & Fax.
4 Click the plus (+) sign, and then click IP.
5 Select Line Printer Daemon - LPD for Protocol.
6 Enter the IP address of the printer in the Address area.
7 Select the model of your printer for Print Using.
NOTE:
• When the printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.
8 Click Add.
To Next Page
Loading...
