Fujitsu Airstage J-II Series - Page 410


WIRING SPECIFICATIONS
Use Size Wire type Remarks
Power supply cable
Maximum
16 AWG
(1.25 mm
2
)
245 IEC 57 or equivalent
1 ø AC100 - 240 V 50/60 Hz,
2 Wire + ground
(Always ground the unit)
Minimum
20 AWG
(0.5 mm
2
)
Transmission cable
22AWG
(0.33
mm
2
)
LEVEL4 (NEMA) non-polar 2
core, twisted pair solid core
Shielded
L
ON
W
ORKS
®
compatible cable
External input /
output cable
22AWG
(0.33
mm
2
)
Polar 2core, Twisted pair
Use cable in accordance
with local rules for cable.
Fuse capacity 5 A

SPECIFICATIONS
Power source voltage (V)
1 ø AC 100 - 240
Power source frequency (Hz)
50 / 60
Input Power (W)
22
Display
7.5-inch TFT color LCD display (640 × 480 pixels), with Touch panel
LED indicator
Power LED (Green)
External interface
USB 2.0
Transmission line
Ethernet port *
1
(Ethernet port is required for remote connection using internet.)
EXT IN: (Either emergency stop or batch operation/stop,
Electricity meter *
1
)
(Either Dry contact or Apply voltage can be selected)
EXT OUT: (Operation state, error state)
Reset SW
Usage temperature range: °F (°C)
32 to 104 (0 to 40)
Usage humidity range (%)
0 to 85 (no condensation)
Storage temperature range: °F (°C)
-4 to 158 (-20 to 70)
Storage humidity range (%)
0 to 85 (no condensation)
Dimensions [H × W × D]: in. (mm)
10-1/4
×
9-11/16
×
2-1/8 (260
×
246
×
54)
Weight: lbs. (g)
5 (2,150)
*
1
: Only for UTY-DTGYZ1
- (05 - 47) -
CONTROL SYSTEM CONTROL SYSTEM