GROUP
This function is used when operating a multiple number of remote controller group at a time
from the System Controller or Touch Panel Controller or Central Remote Controller.
z
Example
A
B
C
D
Refrigerant
system 1
Heat
Recovery
system
Refrigerant
system 2
Heat pump
system
System
controller
Group A: "Group" is possible with only one indoor unit
Group B:"Group" is possible with spanning the RB groups.
Group C:"Group" is possible with spanning the RB group and indoor unit of cooling only type.
Group D:"Group" is possible with spanning the refrigerant systems.
● The contents of a setting may not be reflected by operational status.
(B, C, D group)
- (05 - 113) -
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
Need help?
General
