Fujitsu Airstage J-II Series - Page 682

9) Select the “13” in Menu 2-F1 Settings. Then press the “ ” button.

ADDRESS SETTING
z
INDOOR UNIT ADDRESS SETTING
10) Select the 2-wire remote controller address with the SET TEMP. “ ” or SET TEMP. “ ”
button. Then press the “ ” button.
Select the 2-wire remote controller
address (Ex. Select the 002-01)
11) Set the function number with the SET TEMP. “ ” or SET TEMP. “ ” button. Then press
the “ ” button.
Function number
12) Set the setting number with the SET TEMP. “ ” or SET TEMP. “ ” button. Then press
the “ ” button.
Indoor unit address
- (07 - 35) -
FUNCTION SETTING FUNCTION SETTING