USING SETUP MODE
User's Manual 5-21
Table 5.4 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E
and Epson ESC/P2 emulations. The notes are defined at the end of
the table.
MENU1 and
MENU2 Items
Options Description
<QUALITY>
(continued)
SH-DRFT
Super high-speed draft print quality. This
option provides lower resolution than hi-draft
quality, but at 4.4 times letter speed.
Condition: The margin is enough to speed up.
<PITCH> ## CPI 2.5, 3, 5, 6, 10, 12, 15, 17, 18, or 20 cpi
(characters per horizontal inch)
If 15cpi is selected at ESC/P2 emulation, font
size is compressed and DQ and HDQ printing
is done at LQ speed.
To avoid speed down, select NOCMPRS at
PROP SP Proportional spacing (1/12 inch per character
space)
<LINE SP> ## LPI 1, 2, 3, 4, 5, 6, 7, or 8 lpi
(lines per vertical inch)
6 lpi 3 lpi (double spacing)
ABCD ABCD
ABCD
ABCD ABCD
ABCD
ABCD ABCD
To Next Page
Loading...
