USING SETUP MODE
5-54 User's Manual
Table 5.7 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG
Items
Options Description
<LOCK> Lock function of setup mode.
NONE Enables all buttons on the control
panel.
SETUP Disables the setup-related buttons to
keep the printer from entering setup
mode during the offline state.
ALL Disables the setup-related buttons and
the MENU button.
Once this setting has been selected,
setup mode cannot be entered from
the control panel. To cancel this
setting, turn the power on while
simultaneously pressing the HI
IMPACT, PAPER PATH, and LF/FF
buttons.
<//S//> Effectiveness of the Cut Sheet
Selection command (//S//).
ENABLE Makes the command effective.
Note: The Cut Sheet Selection
command (//S//) changes the
paper source to the paper table
and waits for manual insertion
of a cut sheet.
DISABLE Makes the command ineffective.
To Next Page
Loading...
