108
How to operate the tuner
Setting a station name
Station name settings can be changed.
Press the [FUNC] button for less than one second while
in the tuner mode.
The function mode is activated.
Turn the [SEL] button to select Station Name.
The selected item will be highlighted.
Press the [SEL] button.
The station name setting mode is activated.
Press the [ ] button to select the character type.
Pressing the button will switch types from [ABC] (upper-case
alphabet characters) to, [123] (numeric characters) and then [!"#]
(symbols).
Press either [SEL] or [ ] button to select the position in
which to enter the character.
The character will be inserted where the cursor is flashing:
[SEL] button: Moves the cursor to the right.
[ ] button: Advances the cursor to the left. Pressing and
holding the [ ] button moves the cursor to the left.
[FUNC] button
[SEL] button [RTN] button
[ ] button
[] button
CD8445.book 108 ページ ２００４年１２月１３日 月曜日 午前１１時３０分
To Next Page
Loading...
