Fujitsu ECLIPSE CD8445 - DSP Setting

125
How to operate the Sound Adjustment Mode
IX
DSP Setting
The DSP feature adds reverberations to simulate ambience in
different types of surroundings (room size).
Turn the [SEL] button to select DSP.
Press the [SEL] button.
The DSP mode is activated.
Turn the [SEL] button to select the room size.
When the button is turned, the setting item changes in the
following order.
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
[SOUND] button
[SEL] button [RTN] button
CONCERT
LIVE
CLUB
CATHEDRAL
STADIUM
DEFEAT
CD8445.book 125 ページ ２００４年１２月１３日 月曜日 午前１１時３０分