Fujitsu ECLIPSE CD8445 - Operations During Normal Mode

124
How to operate the Sound Adjustment Mode
Operations during Normal Mode
Press the [SOUND] button.
The mode will change to sound adjustment mode (normal mode).
Refer to "Operations during Advance Mode" on page 131 for details
on the operating the Advance Mode.
Turn the [SEL] button to select a setting item.
When the button is turned, the setting item changes in the following
order and the selected item is highlighted.
Press the [SEL] button.
If you press the [SOUND] button during sound adjustment mode, the
adjustment mode is canceled and the mode returns to normal music
mode.
When switching between Normal Mode and Advance Mode, please
make sure that the volume level is set to 0.
[SEL] button
[SOUND] button
DSP Position
X-OverNon-F Output
Harmonizer
Non-F Phase
CD8445.book 124 ページ ２００４年１２月１３日 月曜日 午前１１時３０分