29
ESN security operating procedure
III
What happens if an incorrect CD is inserted?
After the 5th incorrect attempt, the display reads
[HELP] for five seconds.
After the [HELP] message will appear for five seconds, serial
number will appear.
Press the [OPEN] or [CD ] button to close the front
panel.
Press the [FUNC] button, then button [6], and hold
them for five seconds.
After the [SEC] message will appear for two seconds, rolling
code (six digit) will appear.
Press the [FUNC] button.
A [DISC] message appears.
You will have five more attempts the to insert correct disc.
Insert the key CD into the slot.
If the correct CD is inserted, an [OK] message will appear for
two seconds and the CD will be ejected.
● If an incorrect CD is inserted, an [ERR_] ("ERR" and error
number) message will appear for two seconds, after which the
CD will be ejected.
● This process cancels the protection for ESN deck.
● Note ●
If after 5 tries the correct Key CD is not inserted, the display reads
[CALL800]; the unit must be returned to Eclipse to be reset. In this
case, please contact your Eclipse dealer for assistance. For
country-specific customer service information, refer to "How to
contact customer service" on page 209.
Your Key CD can be easily forgotten. Write the album name in a
reminder note (See page 211).
CD8445.book 29 ページ ２００４年１２月１３日 月曜日 午前１１時３０分
To Next Page
Loading...
