Fujitsu ECLIPSE CD8445 - Switching the Brightness

52
Basic operation
Switching the brightness
Adjust the display brightness to the best level.
Turn the [SEL] button to select Bright.
The selected item will be highlighted.
Press the [SEL] button.
The mode will change to luminance adjustment mode.
Turn the [SEL] button to adjust brightness.
When the button is turned, the brightness level changes in the
following order.
(Level) 1↔2↔3↔4↔5
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in display
adjustment mode.
Press the [DISP] or [RTN] button to exit display
adjustment mode.
[SEL] button
[DISP] button [RTN] button
CD8445.book 52 ページ ２００４年１２月１３日 月曜日 午前１１時３０分