Fujitsu ECLIPSE CD8445 - How to Turn the Security Indicator On;Off

39
ESN security operating procedure
III
How to turn the security indicator on/off
Once ESN security is activated, the indicator flashes whenever the
vehicle's ignition switch is turned off, warning potential thieves that the unit
is protected. However, if do not want this visible deterrent, it may be
turned off.
With the unit in standby, press the [FUNC] button, then
button [2] and hold both for more than one second.
[IND. FLASH] or [IND.-----] appears on the display.
[IND. FLASH] means the security indicator will flash when the
vehicle's ignition switch is off, and [IND.-----] means it will not.
Repeat the above steps to reactivate the flash mode.
Button [2]
[FUNC] button
CD8445.book 39 ページ ２００４年１２月１３日 月曜日 午前１１時３０分