Operation
Indicators on the device
Indicators,Device
The indicat ors are on the front of the c asin g. Which indicators are available on your
device depends on the configuration level you have selected.
2
3
1
4
No. Indicator Description
1 Drive indicator
(depending on device
variant):
The indicator lights up when the CD-ROM or DVD drive in the
device is accessed. Never under any circumstances remove the
CD/DVD while the indicato r is lit.
2 Hard disk indicator The indicator lights up when the hard disk drive in the device
is being accessed.
3 Power-on indicator
Caution: In e
nergy-saving mode, the device must not be
disconnecte
d from the mains supply, as this could lead to loss
of data.
• The indica
tor is illuminated:
The device is switched on.
• The indic
ator is flashing:
The device is in energy-saving mode. After being switched on
with the ON/O FF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
•Theind
icator is not lit:
The device is switched off.
4
Indicator for optional
components, e.g.
SmartCard re ader
(depending on the
device variant)
The indicator lights up when optional components, e.g. SmartCard
reader, are accessed.
Fujitsu 23
To Next Page
Loading...
Need help?
General