Problem solutions and tips
The device cannot be switched off w ith the ON/OFF switch.
Cause
Remedy
System crash ► Keep the on/off switch pressed for at least 4
seconds until the machine switche s off.
Caution: This can lead to a loss of data!
This procedure does not allow the operating
system to shut down in an orderly way. The next
time the system is started there may well be
error messages.
Monitor remains blank
Cause
Remedy
Monitor is switched off ► Switch your mo nitor on.
Power saving h as been activated (screen is
blank)
► Press any key on the keyboard.
or
► Deactiv a te the screen saver. If
necessary, enter the appropriate
password.
Brightness control is set to dark ► Adjust the brightness control. For detailed
information, please refer to the operat ing
manual supplied with your m onitor.
Power cable not connected
► Switch off the monitor and the device.
► Check that the m on itor pow er cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.
► Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.
► Switch on the monitor and the device.
Monitor cable no t connected
► Switch of
f the monitor and the device.
► Check that the monitor cable is properly
connected to the device and monitor.
► Switch o
n the monitor and the device.
Incorrect setting for the monitor
► Restar
t the system.
► Press
F
8
while the system is booting.
► Start
the system i n Safe Mode.
► Set up the monitor as described in the
documentation for your operating system
and monitor.
Fujitsu 29
To Next Page
Loading...
Need help?
General