System expansions
Closing the bo ard retaining mechanism
1
► Fold the board retaining mechanism t o the c losed position (1).
► If necessary, also secure the board clip with the optional safety screw when prese nt.
► Fit the casing cover back onto the casing (see Chapter "
Reattaching the casing cover.", Page 35).
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
64 Fujitsu
To Next Page
Loading...
Need help?
General