Fujitsu ESPRIMO D7 Series - Removing 2.5-inch Drives from Adapter

System expansio ns
Removing 2½ inch drives from a 3½ inch adapter
1
1
2
3
► Press the EasyCh a
nge rails on the drives slightly together (1) and pull the drives with
the EasyChange r
ails one after the other out of the ada pter (2, 3).
a
► Pull the EasyChange rails off the first drive.
► Repeat the step for the second drive.
► If you no longer need the EasyChange rails, secure them again at their location in the adapter.
Fujitsu 49