Fujitsu Esprimo E5 Series User Manual

Getting started
Ports on the d evice
Inter facesExternaldevices,Device,
The ports are located on the front and back of th e d evice. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Serial interface, turquoise
Serialinterface
Microphone port, pink (rear of device) or
black (front of device)
Microphone port
VGA monitor port, blue
Monitorport
Audio input (Line In), light blue
AudioinputLinein
Headphones, pale green(rear
of device) or black (front of
device)
Headphones
Audio output (Line Out), light green
AudiooutputLineout
USB - Universal Serial Bus,
black
UniversalSerialB
us
LAN
LAN port
LANport
PS/2 mouse port, green
MouseportPS/2mouseport
PS/2 keyboard port, purple
Keyboardport
DVI-I m onitor port DP DisplayPort
Some of the c onn ecte d devices require sp ecial drivers (see the
documentation for the conn ected device).
Connecting a monitor
► Follow the instructions contained in the m onitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor
► Connect the data cable of the monitor into the req uired monitor port of your device.
The monitor connector on the device is only approved for use with monitors that
have a rated current less than or e qual to 1.0 A at 230 V or less th an o r equal to
2.0 A at 100 V. The values for the monitor current consumption can be found in th e
technical data for the monitor or in the operating manual for the monitor.
► Depending on the configuration level of your device, plug the monitor p ower
cable into the grounded mains ou tlet.
18 Fujitsu

Fujitsu Esprimo E5 Series Specifications

General

Brand	Fujitsu
Model	Esprimo E5 Series
Category	Desktop
Language	English