System expan sio ns
Installing a multicard reader or module c arrier containing
a SmartCard read er and/or WLAN
module
1
► Slide the module carrier/multicard reader into the drive casing in the direction of the arrow (1).
► Fold out the drive cage (se e Chapter "
Opening the drive cage", Page 39).
1
1
► Secure the module carrier/multicard reader w ith the screws (1).
► Connec
t the cables to the module carrier/multicard reader. Make sure the polarity is correct.
► Fold the drive cage back into the closed position (see Chapter"
Closing the drive cage", Page 40).
Fujitsu 47
To Next Page
Loading...
Need help?
General