Getting started
Getting s tarted
Gettingstarted
Please observe the safety information in the "Important notes", Page 10 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentso f deliveryPackaging,
► Unpack all the individual parts.
► Check the contents of the package for a ny visible damage caused durin g transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingf or firstuse ,overvie wPreparingf or use,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have r eceived other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these exte rnal devices.
Drives and boards
If you have received drives or boards with yo ur device, please do not install
them until after first-time setup. How to install drives and boards is described
in the "
Syst em expans ions", Page 35 chapter.
Fujitsu 13
To Next Page
Loading...
Need help?
General