System expan sio ns
Installing and removing boards
Depending on the device variant, your device will be equipped to accept either
high-profile boards or low-profi le bo ards.
Installing and removing high-profile boards
(device-dependent)
You c an install additional modules in order to increase the performance of y our machine.
The number, position and arrangement of the board s lots on t he m ainboard c an be found in
the m anua l for the mainboard. Board s may a lready be installed on shipment.
Board,Board,
A slot cover is pro vided for every slot. I f no board is installed, the slot cover
must be used to protect the slot.
When you install a board, do not discard the corresponding slot cover.
For cooling, protection against fire and in order to comp ly with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover if you remove the board.
Removing the board cage
► Remove the casing cover (see Chapter "Removing the casi ng cover", Page 37).
1
2
► Lift the board c age out of the casing (1).
► Open the retaining mechanism on the board cage (2).
Fujitsu 55
To Next Page
Loading...
