Getting started
Vertical operating position (optional)
Use t he optional rubber feet or base feet if you wish to operate the
device in the vertical operating position.
The set-up direction is compulsory: The ON/OFF switch must be at
the top to ensure sufficient ven tilation.
Operation in a vertical o perating position is not permitted in Taiwan.
Verticaloperatingpo
sition
Operatingpos ition,v
ertical
BasefeetSidecover
Using the device with base feet (optional)
Proceed as follows to operate the device in the vertical operating position with the base feet:
► If necessary, disco nnect the cables connected to the device.
► Place the device on the base feet as shown.
Fujitsu 15
To Next Page
Loading...
Need help?
General