Getting started
Setting up the device
Videoworks tationErgonomicDevice,
When installing your device, please read the recommendations and
safety notes in the "Safety" manual.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of th e m ultitude of different finishes and varnishes used on furn iture, it is
possible that the rub ber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39 in should be maintained
from other devices on casing sides without ventilation s urfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor o r the device.
A minimum distance of 2 00 mm / 7.87 in from the device must be
observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical specification",
Pag e 66, "Ambient conditions"). P rotect th e device ag ainst dust, humidity a nd heat.
Operating po s iti
on
You can use the de
vice in a vertical or horizontal operating position.
With the aid of s
uitable feet, it is possible to use the device in a vertical operating
position (see "
Vertical opera ting position (optional)", Page 15).
14 Fujitsu
To Next Page
Loading...
Need help?
General