(3) Select the Manager No. that was set in Step 3 for [Manager No.], set the required items, and click
the [OK] button.
The screen display returns to the trap list of the [Setup SNMP Agent Trap] screen.
(4) Check the trap that was set in Step (3) is added in the trap list and click the [Set] button.
A confirmation screen appears.
(5) Click the [OK] button.
The SNMP Trap settings are applied.
(6) Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
6 Download the MIB file.
Download the MIB file that is registered in the
ETERNUS AF.
(1) In [Action], click [Download MIB File].
The [Download MIB File] screen appears.
Chapter 6 Monitoring Settings
6.2 Various Notification Settings
91
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0
To Next Page
Loading...
