How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Daily Care
Operational
Settings
Chapter 5 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
100
How to Load
Documents
Scanner
Overview
4 Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 21).
5 Reset the cleaning counter.
Reset the counter by performing one of the following actions:
Reset the counter in [4: Consumable counters] on the [Settings
Menu] screen of the operator panel.
For details, refer to "3.2 Settings Menu" (page 55).
Reset the counter in the Software Operation Panel.
For details, refer to "Resetting the Sheet Counters" (page 160).
Be careful not to get your fingers caught
when closing the ADF.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, the document
may not be fed into the ADF.
To Next Page
Loading...
