Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
22
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Documents loaded in the ADF paper chute (feeder) are fed
into the ADF one by one.
Using the chute extensions as in the following procedure will
keep the documents straight and feed them smoothly.
1 Pull out chute extension 1.
2 Lift up chute extension 2.
1.5 Setting Up the ADF Paper Chute (Feeder)
HINT
Make sure to hold the scanner while you pull out the chute
extension.
HINT
If a multifeed occurs for relatively long documents, or if documents
lean forward while scanning, slightly pull up chute extension 2 and
push it down towards the back, and then load the documents to
scan the documents smoothly.
To Next Page
Loading...
