Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
38
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
4 Load the documents in the ADF paper chute (feeder) so
that the narrowest document can be picked by the pick
rollers.
Load the documents face-down in the ADF paper chute (feeder).
ATTENTION
Make sure that all documents are placed over the pick roller
(center of the ADF). Otherwise, some documents may be skewed
or not fed into the ADF.
Width of the Pick
Roller
Good
Width of the Pick
Roller
Bad
To Next Page
Loading...
