Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
119
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
■ Sensor Error
Error codes beginning with the letter "L" are displayed.
Error
code
Error messages Action
L0:11
L2:13
Sensor error
If the problem persists
after turning the power
back on, please inform
your service provider
of the above error
code.
1 Clear any paper dust around the
document sensors.
2 Turn the scanner off then back on.
If the problem persists, write
down the displayed error code
and contact your FUJITSU
scanner dealer or an authorized
FUJITSU scanner service
provider.
L6:1B Sensor error
If the problem persists
after turning the power
back on, please inform
your service provider
of the above error
code.
1 Clear any paper dust around the
ultrasonic sensors.
2 Turn the scanner off then back on.
If the problem persists, write
down the displayed error code
and contact your FUJITSU
scanner dealer or an authorized
FUJITSU scanner service
provider.
To Next Page
Loading...
