How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
55
How to Load
Documents
Scanner
Overview
This section explains about the Settings Menu.
When you press the [Menu] button while the [Ready] screen is
displayed, the [Settings Menu] screen is displayed.
The Settings Menu can be used to configure various
operational settings upon scanning.
There are two menus in the [Settings Menu] screen.
User menu
You can configure basic settings for operating the scanner and using
the operator panel.
Administrator menu
You can configure advanced settings for operating the scanner and
using the operator panel.
To switch between the menus, press down both the [] and
[] buttons at the same time for three seconds or longer while
the [Settings Menu] screen is displayed.
When the scanner is turned off, the user menu appears.
3.2 Settings Menu
To Next Page
Loading...
