Fujitsu fi-7460 - Operational

How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
52
How to Load
Documents
Scanner
Overview
Indications on LCD
Display Description
Processing initialization.
Ready to start scanning.
Indicates that the
initialization was
successfully completed.
For more details about the
indicators, refer to
"Indicator" (page 54).
An item from the menu can
be selected.
When you press the [Menu]
button while the [Ready]
screen is displayed, the
[Settings Menu] screen is
displayed.
The Settings Menu can be
used to configure various
operational settings upon
scanning.
For details about the
Settings Menu screen,
refer to "3.2 Settings Menu"
(page 55).
Title
Counter
Indicator
Title
Items
A function item can be
selected.
When you press the [] or
[] button while the
[Ready] screen is
displayed, the [Function
Selection] screen is
displayed.
By using the Function
Selection, you can
configure the application
you want to launch when
you press the [Scan/Enter]
button while the [Ready]
screen is displayed.
For details about the
Function Selection screen,
refer to "3.3 Function
Selection" (page 73).
Indicates that a temporary
error occurred during
scanning.
Error codes beginning with
the letter "J" or "U" are
displayed.
For more details about the
errors, refer to "Temporary
Errors" (page 113).
You can clear the error
display by pressing the
[Stop/Clear] button.
Display Description
Title
Items
Error code
Error
Message