Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
134
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
*1: "Consumables" refers to the brake roller and the pick roller.
No (continued)
Is the sensitivity level for paper protection set to high in the
operator panel or the Software Operation Panel?
Yes
Set the sensitivity level for paper protection to low in either of the following ways:
Select [16: Paper Protection] in the [Settings Menu] screen on the operator
panel, and select [1: Low] for the sensitivity to detect either warped documents
or paper jam noise.
For details, refer to "3.2 Settings Menu" (page 55).
Select [Paper Protection Sensitivity] on the Software Operation Panel, and
select [Low] for the sensitivity level to detect either warped documents or paper
jam noise.
For details, refer to "Specifying the Sensitivity Level for Paper Protection [Paper
Protection Sensitivity]" (page 172).
No
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 139) first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.
To Next Page
Loading...
