Fujitsu fi-7460 - Operational

How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
54
How to Load
Documents
Scanner
Overview
Indicator
iMFF Setting
Displays the iMFF setting as follows:
In Manual mode, is displayed at all times.
In Auto mode 1 and Auto mode 2, the number of multifeed patterns memorized (max. of 8 patterns) is displayed.
For details, refer to "3.2 Settings Menu" (page 55).
Icon Mode
Manual
mode
Auto mode 1
Auto mode 2
Application Number
Displays the number for the application that you want to launch when you press the [Scan/Enter] button while the [Ready]
screen is displayed.
For details, refer to "3.3 Function Selection" (page 73).
Information
flashes when there is a message for replacing consumables/cleaning/glass cleaning/regular maintenance.
[Consumables], [Cleaning], [Clean glass!], or [maintenance] also flashes on the second line in the [Ready] screen.
For information regarding appropriate actions to take when flashes, refer to "3.2 Settings Menu" (page 55).
Prioritize Panel Settings
appears when the operator panel settings are prioritized.
For details, refer to "3.2 Settings Menu" (page 55).