RX100 S5 Operating manual 13
Preface Features
Onboard SATA controller
A SATA controller is fitted to operate the two SATA hard drives. The LSI
Embedded MegaRAID software supports RAID levels 0 and 1.
I The controller has its own configuration utility. More detailed information
may be found in the “Embedded MegaRAID Software User’s Guide”
manual (on the ServerBooks DVD under “Controllers”).
Onboard SAS controller with Integrated Mirroring Enhanced functionality
A SAS controller with “Integrated Mirroring Enhanced” (IME) functionality is
fitted to operate the two SAS hard drives. IME supports RAID level 0 and 1 for
the internal hard disk drives.
I The controller makes a separate utility available for IME configuration.
For further information, refer to the “SAS/SATA Controller MegaRAID
1064 / 1068 / 1078 Installation Guide” on the ServerBooks DVD (select
“Controllers” from the menu).
Accessible drives/components
A number of mounting locations are available:
– An installation slot for a ServerView Local Service Panel (optional)
– An installation slot for a slimline DVD drive (option)
The accessible drives/components integrated in this locations cannot be
replaced during operation.
Power supply
The server has a built-in power supply unit, which automatically sets itself to a
mains voltage in the range 100 V - 127 V or 200 V - 240 V.
To Next Page
Loading...
